How to Spray Paint a Car Like a Professional – 10 Top tips!

Spray paint a car yourself?

You will be astonished at how easy it is to get a great spray finish with a little guidance. Don’t just rush in without some expert knowledge or you’ll be doomed from the off. There are a few things you need to know when it comes to the prep and application and advice on how to spray paint a car properly.

Click here for learn more Videos

Tip 1:
Collect everything that you are going to need and place them neatly in an orderly manner. Remember to protect the surrounding area from over spray. Remove any car parts that do not require painting and mask any that cannot be easily removed with good quality masking tape and paper.

Tip how to spray paint car2:
Seek out all rough areas and sand smooth with 300 grit sand paper. This also helps the paint adhere to the surface better. Be sure to clean up all the resulting dust and dirt as this can spoil the final paint job if it’s sprayed over.

Tip 3:
Your first application will be the primer coat. This helps you achieve a consistent even coat and ensures the finish coat adheres properly. When applying the primer, make sure you spray light coats and allow drying time between coats.

Tip 4:
You are now set for the main event the finish color. You may have decided to use the spray car paint that comes in aerosol cans, or perhaps you have opted to paint with a spray gun. Whether you have opted for a spray can or have a spray gun you need some practice. So get in a few practice strokes on something you’ve chosen for this purpose.

Ok, lets start. Smoothly begin your spraying passes. Don’ hold the gun in one spot or your paint will run and your coverage will be uneven. If this should happen, you’ve got a major remedial job on your hands.how to spray paint car

Tip 5:
It’s up to you if you want to wet sand between coats.

Tip 6:

Since a lot depends on personal preference you should check out opinions from local professionals or online videos. But now you are ready to apply the clear coats. This gives a nice glossy finish and helps to protect that finish. Two coats should do it but apply a third coat if you’r not happy.

Be sure that you give enough time for drying between coats.

Tip 7:
You can wet sand again if you wish. Again get advice if your not sure. Use the following grits in the following order: Starting with 800, 1000, 1200, 1500 and then finally 2000. This removes spots that may be a little unsightly in the clear coat.

Tip 8:
You will now use the rubbing compound to buff up the surface.

Tip 9:

Buff the surface to a nice gloss. Use a medium cut polish to do this. You should now have a great looking finish.

Tip 10: how to spray paint car
You can now apply a few coats of wax to bring out the sheen.

If you want to learn more about the secrets of automotive spray painting in 2 hours or even less: Visit SprayPaintSecrets .

Step By Step For Beginners and Professionals alike. Quickly learn The Secrets Of A Professional Paint Job. This is invaluable for both DIY Car Resprays and Bodywork Paint Repairs.

Click here to learn more

Car spray painting can be particularly tricky, and as such, it is not something you should attempt unless you have a lot of experience with this activity or get good advice like the spray paint car videos I recommend. If you are not thinking of a major revamp, car spray painting is always a good alternative to upgrading your car.